After the many comments and questions regarding the recording capabilities of  Bose T1 Tonematch I decided to revisit my recording experiences, using the Bose Tonematch T1, with a new recording of “Landslide”.

First thing I did was to update drivers for the Bose T1 Tonematch which I could not find on but were able to locate through a google search with a link to

The recording of Landslide was recorded with the Bose T1 Preamp OUTPUTs going into a Zoom H5.  Using the Preamp OUT, located beneath channels 1-3 on the Bose T1 Tonematch I ran channel 1 Preamp OUT of the T1 (vocal) into the channel 1 input of a Zoom H5.  I then ran channel 2 Preamp OUT from the T1 (guitar) to the channel 2 input on the Zoom H5.  The results were 100% better than my recording with the Bose T1 Tonematch using the Master or Aux outputs.

I’ve tried recording with the Bose T1 Tonematch, Master and Aux OUT that will capture the effects but, there is no way to separate the sound as these outputs are one TRS for a stereo output.  I noticed a bit of unwanted background noise when recording from either the Master or Aux OUT.  See for this video.

Watch for the followup “USB Recording with Bose T1 Tonematch”

Landslide recorded with Bose T1 Tonematch Preamp OUT.